Shipping Worldwide


and Best Quality


Your purchases are protected


+356 2731 5555

KW Variant 3 Levelling

Category Tags ,

KW V3 Leveling

Invisible – BUT YOU FEEL IT!




The KW Leveling suspensions are ideal for drivers who are not looking for maximum lowering, but seeking the driving dynamics and comfort of a KW Coilover suspension in combination with the almost original manufacturer’s series floor clearance.


The KW Leveling suspensions focus on the combination of increased driving dynamics and comfort in connection with a minimum lowering or, if desired, raising of the suspension. The KW Leveling suspensions are the ideal retrofit suspensions for frequent drivers on poorly developed roads or drivers that use their car mainly in metropolises and urban areas than have numerous speed bumps. The progressive suspension springs are designed to give their spring rate a plus in driving comfort. Accordingly, the KW Leveling suspensions have an adjustable, comfort-oriented basic damper tuning.




Setup – factory pre-configured damping setup with separately adjustable compression and rebound

The KW Leveling suspension “inox-line” is the ideal retrofit option for drivers who are looking for everyday practicality, increased rolling comfort, and sportiness. The separately adjustable dampers in compression and rebound with their “TVR-A” and “TVC-A” technology allow extensive damper tuning. This makes it easy to additionally influence the steering behavior, directional stability, tire grip, and handling characteristics significantly for safe control at the limit and increased driving comfort.


Rebound damping

Compression damping on the front axle

Compression damping on the rear axle


TVR-A rebound damping:
The two-stage patented “TVR-A” technology allows the low flow rates to flow through an adjustable conical low-speed bypass at slow damper speeds and opens the main rebound valve for the high flow rates at higher piston speeds. This results in a significant increase in driving comfort without affecting the high-speed in the safety-relevant area. 16 precise clicks are available for individual adjustment so you can choose between more comfort or more body control.


TVC-A compression damping:
With 12 precise clicks, the adjustable compression valve (“TVC-A” technology) can reduce or increase the cross-section in the low-speed valve to achieve more or less compression damping. At the same time, the spring-preloaded needle valve opens its maximum valve cross-section together with the spring-preloaded main valve at sudden high piston speeds, to prevent unwanted progressive increases in force in the high-speed range with its blow-off characteristic. This makes it possible to provide better support for the vehicle body and at the same time offer more comfort at high wheel accelerations than with conventional valve technology. The damping adjustment of the compression stage is always supplied in conjunction with a separate rebound adjustment, as only an independent 2-way damper adjustment allows real performance optimization.


Discreet lowering and raising, continuously adjustable

The KW Leveling suspensions are equipped with shock absorbers and damper housings, which correspond in their length approximately to the original sports suspensions of the respective car manufacturer. On request, KW Leveling suspensions can also be adjusted to a discreet lowering (- 10 millimeters) or raising (+ 10 millimeters) via a polyamide spring retainer. The trapezoidal thread allows an adjustment range of up to 20 millimeters.



The benchmark for Coilover suspensions

As with all KW Coilover kits, KW engineers develop the vehicle-specific KW damper tuning, through extensive test cycles on the Nürburgring Nordschleife and our test center on the KW 7-post vehicle dynamics test bench, which is appreciated by car enthusiasts worldwide. With a KW Coilover suspension, you will experience your car more directly and dynamically. This also applies to the new KW Leveling suspensions.


Vehicle-specific basic damper tuning

Assembly of the rebound valve

KW struts are made of stainless steel


After all, you are not just buying any Coilover or aftermarket suspension, but a KW suspension that has been developed and specifically tuned for your vehicle type. As a manufacturer, KW only uses its resources, high-quality components, and the same damper technology as large series manufacturers. With the KW Variant 3 Coilover suspension “inox-line”, the rolling and pitching movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and sportier handling when driving.


Our experience for your driving pleasure

For over 20 years we have been the market leader and driving innovation as a manufacturer of individual suspension solutions for road and racing. No matter where in the world, sporty drivers, car manufacturers, and tuners trust in our KW Coilovers “Made in Germany”.


Vehicle-specific chassis development

Production directly in-house at KW in Fichtenberg

Every KW coilover kit is subjected to extensive load tests

Every KW suspension is subjected to extensive stress tests during production and is developed as well as manufactured directly at our company headquarters in Fichtenberg, Swabia, to meet the high standards of our KW quality management. As a German manufacturer, we provide a multi-year warranty on our KW suspensions, which exceed the quality of the original equipment manufacturer, and on suspension solutions for over 4,600 applications. When installed at one of our KW specialized trade partners, this guarantee is up to five years.